CDI Electronics

Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16

(No reviews yet) Write a Review
SKU:
174-5456-16
UPC:
Does not apply
Width:
12.00 (in)
Height:
6.00 (in)
Depth:
12.00 (in)
Shipping:
Calculated at Checkout
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
  • Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 398-5454A16
$281.77

Description

PRODUCT DESCRIPTION:

Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP Stator 174-5456-16

174-5456-16

  • Thousands of parts available: Outboard, PWC, Inboard, I/O, Powerheads, Gearcases, Outdrives. Call or email us with your requests.
  • Aftermarket Mercury 1981-1993 135,140,150,175,200,220 & 225HP 15/16 AMP 6 Cyl Stator.
Fits:
  • Mercury | 135HP | 1985-1988
  • Mercury | 135HP | 1990-1991 | 16 Amp
  • Mercury | 140HP | 1979-1979 | Inline
  • Mercury | 150/175HP | 1985-1988
  • Mercury | 150/175HP | 1990-1991 | 16 Amp
  • Mercury | 175HP | 1985-1988 | 15 Amp
  • Mercury | 200HP | 1982-1990 | 15 Amp
  • Mercury | 200HP | 1985-1991 | 16 Amp
  • Mercury | 220HP | 1987-1988
  • Mercury | 225HP | 1981-1993

**Product may fit other models not listed here.

Make sure to check your serial numbers and know your motor's model year before ordering:

Important Note On Electrical Parts:
The manufacturer warranty protects you from defects in materials or workmanship but will not cover freight damage, broken solenoids, rust/corrosion/submersion, broken mounting flanges or shafts, cut wires or dismantled units, broken nose housings, units with date codes removed, or any unit showing misuse or altering of any kind. Any defective unit returns will be exchanged with the same part number ONLY. Units returned in working order are subject to a $25 bench test fee and will be returned at buyer's expense. Any part returned with cut wires is subject to a $30 service charge, defective or not.

Please be sure to read and understand all terms and conditions before buying.

View AllClose