CDI Electronics

Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232

(No reviews yet) Write a Review
SKU:
173-1232
UPC:
Does not apply
Shipping:
Calculated at Checkout
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 775530 0581232
$268.02

Description

PRODUCT DESCRIPTION:

Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 Cyl Stator 173-1232

173-1232

  • Thousands of parts available: Outboard, PWC, Inboard, I/O, Powerheads, Gearcases, Outdrives. Call or email us with your requests.
  • Johnson Evinrude 1971-1975 50HP 1976-1977 55HP 6AMP 2 cyl stator No RPM limit, screw terminal power pack.
Fits:
  • Johnson Evinrude | 50HP | 1971-1971
  • Johnson Evinrude | 50HP | 1972-1972 | Elec. Start
  • Johnson Evinrude | 50HP | 1972-1972 | Man. Start
  • Johnson Evinrude | 50HP | 1973-1973
  • Johnson Evinrude | 50HP | 1974-1975 | Cross Flow
  • Johnson Evinrude | 55HP | 1976-1977 | Cross Flow

**Product may fit other models not listed here.

Make sure to check your serial numbers and know your motor's model year before ordering:

Important Note On Electrical Parts:
The manufacturer warranty protects you from defects in materials or workmanship but will not cover freight damage, broken solenoids, rust/corrosion/submersion, broken mounting flanges or shafts, cut wires or dismantled units, broken nose housings, units with date codes removed, or any unit showing misuse or altering of any kind. Any defective unit returns will be exchanged with the same part number ONLY. Units returned in working order are subject to a $25 bench test fee and will be returned at buyer's expense. Any part returned with cut wires is subject to a $30 service charge, defective or not.

Please be sure to read and understand all terms and conditions before buying.

View AllClose